Log-in
Search
- Microchip Employees Only
- Developer Help
- Global
- What's New

Demonstrating 8-bit I2C Controller Read, Step 6: Reconfigure Hardware for ATmega4809

Last modified by Microchip on 2023/11/09 08:54

Complete ATmega4809 Curiosity Nano Board connections

Disconnect the USB Micro-B cable from the Curiosity Nano Base for Clicks Board.

Remove the PIC18F47Q10 Curiosity Nano Board from the Curiosity Nano Base. Connect the ATmega4809 Curiosity Nano to the Curiosity Nano Base using the headers as before.

Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.

Demonstrating 8-bit I2C Controller Read, Step 6: Reconfigure Hardware for ATmega4809

Complete ATmega4809 Curiosity Nano Board connections

Menu

Microchip Support