Skip to Content
Home Logo of the wiki
    Developer Help
  • Log-in
    • XWikiGuest
      Microchip Employees Only

    • Developer Help

    • Global
    • What's New
  1. Learn Software and Hardware Tools at Microchip
  2. Developing Applications with MPLAB® Harmony v3 Software Framework for MPUs
  3. SAMA7G54-EK – Writing MPLAB® Harmony v3 Application and at91bootstrap to e.MMC Flash Memory using SAM-BA® ISP

Persons liking SAMA7G54-EK – Writing MPLAB® Harmony v3 Application and at91bootstrap to e.MMC Flash Memory using SAM-BA® ISP

Last modified by Microchip on 2025/08/12 11:28

Menu

On This Page

  • Introduction
  • Prerequisites
  • Hardware
    • SAMA7G54-EK Evaluation Kit
      • Jumpers
      • SD Memory Cards
      • Power
  • Embedded MultiMediaCard (e.MMC) Flash Memory
  • Setup Console Serial Communications
  • Setup SAM-BA Host to Monitor Communications
  • Create Image File
    • Partition SD Memory Card with DiskPart Utility
    • Create Image with Win32 Disk Imager Utility
  • Write sdcard.img to e.MMC Flash Memory
  • Enable OTPC Emulation Mode
  • Set Boot Configuration Packet to boot from e.MMC Flash Memory
  • Run MPLAB Harmony v3 Application on the Target
  • Summary
  • Learn More

Microchip Support

Query Microchip Forums and get your questions answered by our community:

  Microchip Forums
  AVR Freaks Forums

If you need to work with Microchip Support staff directly, you can submit a technical support case. Keep in mind that many questions can be answered through our self-help resources, so this may not be your speediest option.

  Technical Support Portal

© 2026 Microchip Technology, Inc.
XWiki Debian 17.10.2