FAQ updates by Boards
Last modified by Microchip on 2025/03/03 07:16
Sama5d29Curiosity
- Basic systemd user guide
- Using the SAMA5D2-compatible ADC device.
- How to configure Crypto driver.
- Configure AT91 USB Gadget on Linux and Endpoint order management (composite USB)
- How to use Pulse Width Modulation driver
- How to use the KMS/DRM LCD driver
- Introduction for how to use Max Touch
- How to apply DTBOs in U-boot.
- How to boot up the board from SD card.
- Hash error when booting FIT image
- How to use U-boot with FIT image to load overlays.
- Some U-Boot FAQ entries.
Sam9x60Curiosity
- Basic systemd user guide
- Using the SAMA5D2-compatible ADC device.
- How to configure Crypto driver.
- Configure AT91 USB Gadget on Linux and Endpoint order management (composite USB)
- How to use Pulse Width Modulation driver
- How to use the KMS/DRM LCD driver
- Introduction for how to use Max Touch
- How to apply DTBOs in U-boot.
- How to boot up the board from SD card.
- Hash error when booting FIT image
- How to use U-boot with FIT image to load overlays.
- Some U-Boot FAQ entries.
- How to use WILC3000 on SAM development boards.
- Unable to build gst1-at91-gstreamer plug-in in Buildroot.
- External Component on External Bus Interface
- How to connect LCD module from PDA to the Boards.
Sam9x75Curiosity
- U-Boot FAQ
- Introduction for how to use Max Touch
- How to configure Crypto driver.
- Configure AT91 USB Gadget on Linux and Endpoint order management (composite USB)
- How to use Pulse Width Modulation driver
- How to use the KMS/DRM LCD driver
- Using I2SC (Inter-IC Sound Controller)
- Media controller pipeline for image acquisition and SAM MPU products
- Image Sensor Controller White balance features
- SAMA7G5 Image Acquisition pipeline
- External Component on External Bus Interface
- Using the SAMA5D2-compatible ADC device
- Basic systemd user guide
- How to patch Device Tree Blob in U-boot using Overlays
- Unable to build gst1-at91-gstreamer plug-in in Buildroot
- SD card boot for AT91SAM SoC
Sama7g5-ek
- U-Boot FAQ
- How to use WILC3000 on SAM development boards
- Using Systemd
- Using the SAMA5D2-compatible ADC device
- How to patch Device Tree Blob in U-boot using Overlays
- Using I2SC (Inter-IC Sound Controller)
- Media controller pipeline for image acquisition and SAM MPU products
- Image Sensor Controller White balance features
- SAMA7G5 Image Acquisition pipeline
- Unable to build gst1-at91-gstreamer plug-in in Buildroot
- Using FIT Image and Device Tree Overlays
- Interfacing sama7g5 with parallel Omnivision ov7740 sensor
- Using ASRC (Asynchronous Sample Rate Converter)
- Thermal management support on SAMA7G5
- SAMA7G5 and Sony IMX274 examples
Sama5d2-icp
- How to use WILC3000 on SAM development boards
- Using Systemd
- Using the SAMA5D2-compatible ADC device
- How to configure Crypto driver.
- Configure AT91 USB Gadget on Linux and Endpoint order management (composite USB)
- How to patch Device Tree Blob in U-boot using Overlays
- Unable to build gst1-at91-gstreamer plug-in in Buildroot
- SD card boot for AT91SAM SoC
- Hash error when booting FIT image
- Using FIT Image and Device Tree Overlays
- U-Boot FAQ
- Unable to build OpenWrt with Ubuntu 20.04/21.04
- Compiling Linux Kernel fails looking at OpenSSL header files
- Using Ultra Low Power mode 1 (ULP1) on SAMA5D2
Sam9x60EK
- How to use WILC3000 on SAM development boards
- Basic systemd user guide
- Using the SAMA5D2-compatible ADC device
- How to configure Crypto driver
- USB Gadget Configuration
- How to use Pulse Width Modulation driver
- How to use the Atmel KMS/DRM LCD driver
- How to patch Device Tree Blob in U-boot using Overlays
- Using I2SC (Inter-IC Sound Controller)
- Unable to build gst1-at91-gstreamer plug-in in Buildroot
- External Component on External Bus Interface
- SD card boot for AT91SAM SoC
- Hash error when booting FIT image
- Using FIT Image and Device Tree Overlays
- U-Boot FAQ
- Using ISI (Image Sensor Interface) in Linux4SAM 6.0 and later
Sama5d27WLSom1EK
- How to use WILC3000 on SAM development boards
- Basic systemd user guide
- Using the SAMA5D2-compatible ADC device
- How to configure Crypto driver
- USB Gadget Configuration
- How to use Pulse Width Modulation driver
- How to use the Atmel KMS/DRM LCD driver
- How to patch Device Tree Blob in U-boot using Overlays
- Media controller pipeline for image acquisition and SAM MPU products
- Image Sensor Controller White balance features
- Unable to build gst1-at91-gstreamer plug-in in Buildroot
- SD card boot for AT91SAM SoC
- Hash error when booting FIT image
- Using FIT Image and Device Tree Overlays
- U-Boot FAQ
- Using PTC (Peripheral Touch Controller)
Sama5d27Som1EK
- Basic systemd user guide
- Convert SAM-BA scripts
- Using the SAMA5D2-compatible ADC device
- How to configure Crypto driver
- USB Gadget Configuration
- How to use Pulse Width Modulation driver
- How to use the Atmel KMS/DRM LCD driver
- How to patch Device Tree Blob in U-boot using Overlays
- Media controller pipeline for image acquisition and SAM MPU products
- Image Sensor Controller White balance features
- Unable to build gst1-at91-gstreamer plug-in in Buildroot
- External Component on External Bus Interface
- SD card boot for AT91SAM SoC
- Hash error when booting FIT image
- Using FIT Image and Device Tree Overlays
- U-Boot FAQ
Sama5d2PtcEK
- Convert SAM-BA scripts
- Using the SAMA5D2-compatible ADC device
- How to configure Crypto driver
- USB Gadget Configuration
- How to use Pulse Width Modulation driver
- How to use the Atmel KMS/DRM LCD driver
- How to patch Device Tree Blob in U-boot using Overlays
- External Component on External Bus Interface
- SD card boot for AT91SAM SoC
- Hash error when booting FIT image
- Using FIT Image and Device Tree Overlays
- U-Boot FAQ
- Using PTC (Peripheral Touch Controller)
- Connect Module From PDA
- Compiling Linux Kernel fails looking at OpenSSL header files
- Using Ultra Low Power mode 1 (ULP1) on SAMA5D2
Sama5d2Xplained
- Convert SAM-BA scripts
- Using the SAMA5D2-compatible ADC device
- How to configure Crypto driver
- USB Gadget Configuration
- How to use Pulse Width Modulation driver
- How to use the Atmel KMS/DRM LCD driver
- How to patch Device Tree Blob in U-boot using Overlays
- Using I2SC (Inter-IC Sound Controller)
- Media controller pipeline for image acquisition and SAM MPU products
- Image Sensor Controller White balance features
- External Component on External Bus Interface
- SD card boot for AT91SAM SoC
- Hash error when booting FIT image
- Using FIT Image and Device Tree Overlays
- Boot Logo for SAM SOC's
Sama5d4Xplained
- Convert SAM-BA scripts
- How to configure Crypto driver
- USB Gadget Configuration
- How to use Pulse Width Modulation driver
- How to use the Atmel KMS/DRM LCD driver
- How to patch Device Tree Blob in U-boot using Overlays
- External Component on External Bus Interface
- SD card boot for AT91SAM SoC
- Hash error when booting FIT image
- Using FIT Image and Device Tree Overlays
- U-Boot FAQ
- Use of the AT91 ADC driver
- Connect Module From PDA
- Enable and Configure PMECC (Programmable Multibit ECC) in AT91SAM SoC
- Compiling Linux Kernel fails looking at OpenSSL header files
- PDA detection at boot time
Sama5d4ek
- How to configure Crypto driver
- USB Gadget Configuration
- How to use the Atmel KMS/DRM LCD driver
- External Component on External Bus Interface
- Convert SAM-BA scripts
- SD card boot for AT91SAM SoC
- Use of the AT91 ADC driver
- Enable and Configure PMECC (Programmable Multibit ECC) in AT91SAM SoC
- Compiling Linux Kernel fails looking at OpenSSL header files
- Using ISI (Image Sensor Interface)
- Driver Model in U-Boot
- GUI Solutions
- Yocto Project FAQ
- AT91Bootstrap Debugging with Eclipse for Linux
Sama5d3Xplained
- Convert SAM-BA scripts
- How to configure Crypto driver
- USB Gadget Configuration
- How to use Pulse Width Modulation driver
- How to use the Atmel KMS/DRM LCD driver
- External Component on External Bus Interface
- SD card boot for AT91SAM SoC
- Hash error when booting FIT image
- Using FIT Image and Device Tree Overlays
- U-Boot FAQ
- Use of the AT91 ADC driver
- Connect Module From PDA
- Enable and Configure PMECC (Programmable Multibit ECC) in AT91SAM SoC
- Compiling Linux Kernel fails looking at OpenSSL header files
- PDA detection at boot time
- How to manually select (or enforce) the PDA at boot time
Sama5d3xek
- How to configure Crypto driver
- USB Gadget Configuration
- How to use Pulse Width Modulation driver
- How to use the Atmel KMS/DRM LCD driver
- External Component on External Bus Interface
- Convert SAM-BA scripts
- SD card boot for AT91SAM SoC
- Using ISI (Image Sensor Interface) in Linux4SAM 6.0 and later
- Use of the AT91 ADC driver
- Enable and Configure PMECC (Programmable Multibit ECC) in AT91SAM SoC
- Compiling Linux Kernel fails looking at OpenSSL header files
- Using ISI (Image Sensor Interface)
- Driver Model in U-Boot
- GUI Solutions
- Yocto Project FAQ
- AT91Bootstrap Debugging with Eclipse for Linux
- U-Boot FIT image support
AT91sam9x5
- AT91sam9x5-ek boards
• Convert SAMBAScript: SAM-BA API revisions. (SAM-BA)
• USBGadget Config: Configure AT91 USB Gadget on Linux and Endpoint order management (composite USB). (Kernel, linux-4.4-at91, linux-4.9-at91, linux-4.14-at91, linux-4.19-at91, linux-5.4-at91, linux-5.10-at91, linux-5.15-mchp, linux-6.1-mchp)
• External Component On EBI: Connecting an external component on the External Bus Interface. (Kernel, linux-4.14-at91, linux-4.19-at91, linux-5.4-at91, linux-5.10-at91, linux-5.15-mchp, linux-6.1-mchp)
• SDCard Boot Notice: How to boot up the board from SD card. (AT91Bootstrap)
• U-Boot FAQ: Some U-Boot FAQ entries. (U-Boot)
• Using Isi 6: Using ISI with Linux4sam 6.0 and Kernel 4.14 and later. (Kernel, linux-4.14-at91, linux-4.19-at91, linux-5.4-at91, linux-5.10-at91, linux-5.15-mchp, linux-6.1-mchp)
• Iio Adc Driver: Adc IIO driver introduction. (Kernel, linux-3.10-at91, linux-3.18-at91, linux-4.1-at91, linux-4.4-at91, linux-4.9-at91, linux-4.14-at91, linux-4.19-at91, linux-5.4-at91, linux-5.10-at91, linux-5.15-mchp, linux-6.1-mchp)
• Build Linux Ssl: Kernel Compilation Error related to OpenSSL. (Kernel)
• Selecting PDAat Boot: How to manually select PDA in U-boot. (U-Boot, Kernel)
• Shutdown Wake Up: Use the Wakeup Feature of the Shutdown Controller.. (Kernel, linux-4.4-at91, linux-4.9-at91, linux-4.14-at91, linux-4.19-at91)
• Yocto Project FAQ: Some Yocto Project FAQ entries. (YoctoProject)
• Real Time: Enable Real Time support for AT91SAM9 Soc. (Kernel)
- Older SAM9 boards
• USBGadget Config: Configure AT91 USB Gadget on Linux and Endpoint order management (composite USB). (Kernel, linux-4.4-at91, linux-4.9-at91, linux-4.14-at91, linux-4.19-at91, linux-5.4-at91, linux-5.10-at91, linux-5.15-mchp, linux-6.1-mchp)
• Iio Adc Driver: Adc IIO driver introduction. (Kernel, linux-3.10-at91, linux-3.18-at91, linux-4.1-at91, linux-4.4-at91, linux-4.9-at91, linux-4.14-at91, linux-4.19-at91, linux-5.4-at91, linux-5.10-at91, linux-5.15-mchp, linux-6.1-mchp)
• Build Linux Ssl: Kernel Compilation Error related to OpenSSL. (Kernel)
• Real Time: Enable Real Time support for AT91SAM9 Soc. (Kernel)
• Audio Record On At 91 sam 9 g 20 ek: Audio Record on At91sam9g20ek. ()
• SAM 9 M 10 Gstreamer: M10 Vdec support. ()