Skip to Content

Videos on Working With CMSIS

Last modified by Microchip on 2026/03/05 10:01

CMSIS Logo

Here are links to a series of videos that will help you learn how to work with the Common Microcontroller Software Interface Standard (CMSIS) using the Microchip PIC32CM PL10 family of microcontrollers (MCUs). The lengths of the videos may vary based on the depth and amount of content covered. Click on a series link to access each video.

NameSummary
Introducing CMSIS Support for Microchip Devices

A getting-started video series that includes:

  • Introducing CMSIS Support for Microchip Devices- A Video Series
  • Installation of CMSIS-Driver Packs Using the Arm® Keil® Studio Pack (MDK v6) with PIC32CM PL10
  • Installation of CMSIS-Toolbox CMD line tools and CMSIS-Packs from Arm Keil
  • CMSIS Solutions - Running the Blinky Example, Complemented with MPLAB® for VS Code®
  • Arm CMSIS Solution - Running the Driver Example, Basic Debugging and Serial Monitor
Dev Tool Bits | MPLAB® Tools With Full CMSIS Driver Support Are Here!

A video that walks you through setting up the PIC32CM PL10 in Keil Studio Extensions for VS Code.

Chapters:

  • 00:00 – Intro
  • 00:44 – Setup & Installation
  • 01:30 – OPTIONAL: CMSIS-Toolbox & Packs
  • 2:16 – Creating a new CSolution
  • 3:15 – Add components, Drivers, PLIBS
  • 3:42 – Built-in documentation
  • 4:19 – Switching compilers
  • 4:45 – Build, Run, & Debug
  • 5:09 – Debug Probe settings
  • 5:57 – Outro
Dev Tool Bits | Unlock CMSIS-DAP on MPLAB® PICkit™ Basic & Our MPLAB® Tools In Just 2 Commands

A video about switching an  MPLAB® PICkit™ Basic (or any other supported Microchip tools) to use the industry-standard CMSIS-DAP firmware using the “PyCmsisDapSwitcher” Python® utility.

Chapters:

  • 0:00 - Intro
  • 0:27 – Switcher Overview on PyPi
  • 1:40 – Overview Switching to CMSIS DAP Firmware
  • 2:17 – Switching the FW
  • 2:50 – Showing Tool Recognized in VS Code CMSIS Solutions
  • 3:07 – Tool Recognized in uVision®
  • 3:23 – Tool Recognized in IAR EW®
  • 3:38 – Switching FW back to PICkit Basic
  • 3:53 – Showing Tool in VS Code w/ MPLAB Tools
  • 4:08 – Outro

Back to Top