- Log-in Microchip Employees Only
- Developer Help
- Global
- What's New
Search

Buck Power Supply Graphical User Interface (GUI) Requirements

Last modified by Microchip on 2024/06/24 06:32

Buck Power Supply GUI Software Requirement

MPLAB® X Integrated Development Environment (IDE) v2.20 or newer
MCP19110, MCP19111,MCP19118, and MCP19119 – Buck Power Supply GUI Plugin archive. The archive contains the MCP19110/11/18/19 plugin file, com-microchip-mplab-mcp1911X-buckpowersupply.nbm

MCP19110/11/18/19 – Buck Power Supply Graphical User Interface User’s Guide

MPLAB XC8 C Compiler (v1.33 or later)

Buck Power Supply GUI Hardware Requirement

Microchip programmer/debugger such as PICkit™ 3 In-Circuit Debugger/Programmer or MPLAB ICD 3 In-Circuit Debugger System
MCP19111 Evaluation Board (ADM00397) or another board containing an MCP19110/11/18/19 and programming connector

Learn More

Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.